PRODER: Polymer-based, Water-based, It is a product.

 

Surfaces to be applied.

It is applied to plaster, concrete, aerated concrete, foam concrete, pearlite plaster and all kinds of concrete surfaces in order to provide water insulation, to maintain breathing ability and to prevent contamination and salt vomiting.

 

Features

 It provides high water repellency thanks to its impregnation feature on surfaces. At the same time does not spoil the natural appearance. It prevents the growth of organisms such as moss and fungi on the surfaces it is applied. Prevents calcification by resistance to dissolved salts.

Technical specifications

Color: white.
Use: Sliding, Spraying
Density: 1 g / cm3
pH: 7.5 - 8
Solids: 1%
Drying Time: 4 hours after
Flash Point: none
Storage Life: 1 year
Packing Type: 5 - 10 - 30 lt. in plastic drums.
Protective Life: 5 years

Depending on the smoothness and absorbency of the surface, 5 m² can be applied in a single coat with 1kg. Controlled sample work should be performed for precise consumption.

Application:

 The application surfaces should be dry, free from dust, dirt, and oil, and thoroughly cleaned from swelling and self-supporting parts.

PRODER can be applied to the surface by brush or spraying. It is recommended to apply two or three coats on very absorbent surfaces. No film is formed after the application.

Scope of application:

Concrete floor surfaces on roofs and terraces

Terrace, Balcony, Bathroom Tiles, and ceramic grouts.

Facade, plaster surfaces.

Perlite and Perlite Plaster Surfaces

Prefabricated, Precast Surfaces.

Basement and ceiling paint blisters Prevent.

Preserving historic stone structures.

Historical Artifacts to be Preserved in Natural Conditions.

Porous Provide water impermeability in lightweight concrete.

Artra kimya contact

Visit

Beylidüzü / İstanbul /Turkey

Gsm: +90541 852 2290

Whatsapp: +90541 852 2290

Skayp: artrainsaat 

ARTRA