CLC Technologies
Ready Packaged Products
Art3D-G14 PRINTER MORTAR
Epoxylate
DEFINITION
Art3D-G10 : Cement-based 3D printer mortar with polycarboxylate additives and lightweight aggregate. Designed for layered applications.
USAGE AREAS
1- 3D Printer wall production.
2- Production of 3D Printed garden elements.
3- Production of lightweight structural elements with 3D Printer.
ADVANTAGES
*Single component only water is added.
*It is easy and fast to pump.
*Can be built high.
*Due to the short setting time, continuous layers can be produced.
*Fine powder was used as filler.
*Suitable for the production of decorative building elements.
*Fireproof (A1 class)
TECHNICAL SPECIFICATION
APPLICATION FEATURES
Ambient temperature between +5 °C and +35 °C.
Application should be avoided in very humid and/or very hot weather.
Application under strong wind and direct sun should be avoided.
It should not be applied on surfaces that are frozen, melting or in danger of freezing within 24 hours.
STORAGE AND SHELF LIFE
It should be stored in its unopened original packaging in dry environments. Under appropriate storage conditions, shelf life is 12 months from the date of production.
WARNINGS AND RECOMMENDATIONS
During the application, clothing suitable for occupational and worker health, protective gloves, glasses and a mask should be used. Due to the irritating effects of the uncured material, in case of contact with skin and eyes, it should be washed immediately with plenty of water and soap. If swallowed, consult a doctor immediately. Food and beverage materials should not be brought into application areas. It should be stored in places inaccessible to children.
* Do not breathe dust.
* In case of contact with eyes, rinse immediately with water.
* Do not empty into drains.
* Avoid contact with eyes and skin.
* Use suitable protective gloves and protective glasses/mask.