Liquid and Powder Foam Concrete Agents
GENFIL (Foam Agent) It is a high efficient, organic resin-based foam agent developed for the production of lightweight concrete and lightweight structural elements in the construction sector. The foam material is composed of antibacterial, enzyme-based, active proteins. It is organic, does not harm nature, is not harmful to human health.
GENFIL (Foaming Agent) Concentrated GENFIL Foaming agent is added to clean water in a 1.5% - 2% ratio. This solution is passed through the foam machine to form a foam. The volume of foam produced was tested as a suitable ratio of 80 - 90 g / L. This foam is added to the aqueous material prepared with cement and gypsum and heat-insulated lightweight structural elements are obtained.
Produced foam provides a homogeneous mixture in a short time by bonding with cement grout. During mixing, the foams form a homogeneous distribution in the cement and each particle forms an independent roof. It provides good strength due to the active protein and enzymes in the foam. After the concrete has dried, the pressure resistance of the concrete increases. No dusting, no brittle layer on the concrete surface.
Foam concrete prepared with GENFIL Breathable does not perspire, does not hold moisture. It provides long-lasting concrete.
GENFIL USAGE AREAS
Heat insulated porous lightweight concrete production.
Production of heat-insulated light bricks, briquettes, block bricks, wall panels.
Heat and sound insulation screed production.
Fiber-reinforced concrete backing, filling concrete for heat insulation purposes.
Cement and gypsum-based light plate production.
Production of heat-insulated lightweight tiles and ceramics.
Basement floors in buildings, sub-ground filling concrete for thermal insulation purposes.
Light filling concrete to prevent collapses around the structure.
Porous filling concrete for underground water drainage.
Filling concrete under the road to prevent icing on the bridge and bridge road.
Lightweight concrete production for tunnel and well-filling purposes.
E.P.S. production of heat-insulated lightweight concrete with styrofoam granules.
Production of Perlite plaster and Perlite light concrete.
Production of heat-insulated lightweight floor and wall in steel structure systems.
It is used in lightweight of Wall, Flooring and Carrier elements in single-story houses.
Density: 1.05 kg / Lt-Liquid
Usage Density in Foam Concrete: 80-90 gr / LT
Release time of foam surface water: 5 hours,
Setting Start in Concrete: 20 C Average 2 h
Shelf life: Unopened packaging 24 Months
Storage: Keep in a cool place
Having a natural structure is not harmful to human health.
It is exploded in the foam production machine by adding water in certain proportions.
The effective resistance of foam surface membrane, maximum surface load.
Ability to split in case of the increased surface load.
It is anti-bacterial, effective against mold.
Foam density can be adjusted to 50-90 gr / lt.
The dry density of concrete can be adjusted from 150 kg / m3 to 1600 kg / m3.
Good insulation thanks to micropores in concrete.
No loss of volume in case of prolonged concrete mixing time.
Minimum loss during transfer by the pump.
R - N can be used in all Cement. 32,5-42,5-52,5
Shortens the lining time of concrete. Air temperature 25 C Mold time 5 hours
Thanks to NANO technology, the bubble surface has active protein.
Produced foam Free to stand for 6 hours.
It does not create stress on the employee because of its natural smell.
GENOCEL Powder: Resin-based powder foam agent developed for the production of light concrete and lightweight structural elements in the construction sector.
Use in Foam Concrete:
Powder foam agent is mixed with water and passed through a foam machine to form foam.
This foam is added to the aqueous material prepared with cement and gypsum
and thermally insulated lightweight structural elements are obtained.
Lightweight aggregate filled, cement and gypsum-based dry mixture:
It is used in dry mixed packaged light aggregate products. In dry-mixed,
packaged cement, and gypsum-based products, it forms a good mixture
by providing homogeneous distribution of mixing water while preparing concrete and plaster.
It expands the surface area by creating micro air bubbles in the mortar.
Makes processing easier by lightening concrete and plaster.
In cement-based light aggregate plasters, it prevents water decomposition during surface applications.
Increases the adhesion of the plaster to the surface. Prevents decomposition
Example Preparation of Lightweight Concrete and Plaster
Cement 250 kg
Perlite 1200 Lt 60kg / m3
GENOCEL Powder agent 1 kg
Water 200 Lt
GENOCELL foam material consists of antibacterial, enzyme-based polymers. It increases the strength of concrete due to its polymer structure. It strengthens the structure by forming a bond between the aggregate and cement in lightweight aggregate filled plasters. GENOCELL Powder agent, Organic, Does not harm nature, It is not harmful to human health.
GENOCEL-POWDER FOAM AGENT USAGE AREAS
1-) Porous light concrete production.
2-) E.P.S. Styrofoam granular Plaster and light concrete production.
3-) Production of Perlite plaster and Perlite light concrete.
4-) Lightweight aggregate filled, lightweight concrete production.
GENOCEL Powder Foam material is mixed with water and foam is created by passing the foam machine through 4-5 bar air pressure. The formed foam is added to the concrete mortar and heat-insulated lightweight concrete is obtained. It provides good strength due to the active protein and enzymes in the foam. After the concrete has dried, the pressure resistance of the concrete increases. There is no brittle layer on the concrete surface.
Foam concrete prepared with GENOCEL Powder Foam Agent Breathes, Does not perspire, Does not hold moisture. It provides long-lasting concrete.
It is composed of antibacterial, enzyme-based, active proteins developed for the construction sector. It is organic, does not harm nature, is not harmful to human health.
GENOCEL-Powder Foam Agent, FEATURES
Content: Organic Resin-Based
Appearance: Fine powder
Color: Light Brown
Density: 0,80 kg / Lt
Rate of Use (Amount of Cement): 0,2% - 0,8%
Setting Start in Concrete: 20 C Average 2 h
Shelf Life: Unopened packaging 2 Years
Storage: Store away from moisture.
Package: 10 kg Bag
GENFIL PW (Foam Agent): It is a resin-based foaming agent developed for the production of Cellular lightweight Gypsum in the construction industry. The aqueous solution is expanded by air pressure to form foam. Light gypsum is produced by adding this foam to the gypsum mortar. .
GENFIL-PW USAGE AREAS
1-) Gypsum-based, heat-insulated light block production.
2-) Gypsum-based heat-insulated wall panel production.
3-) Gypsum based light plate production.
GENFIL-PW CREATING FOAM
GENFIL Foaming Agent is mixed with water and produced from the foaming machine with 3-4 bar air pressure. The foam unit volume produced was tested as an appropriate ratio of 50-70 gr/L.
The foam is added to the gypsum mortar and heat insulated light products are obtained. Concrete compressive strength increases after Gypsum Concrete dries.
Content: Based on organic resin
Density: 1.05 kg/Lt -Liquid
Shelf life: 2 Years
Storage: Store in a cool place out of direct sunlight.
• It is not harmful to the environment due to its natural structure.
• The effective strength of the foam surface membrane, its ability to bear the surface load at the maximum.
• Having the ability to split in case of increased surface load.
• Anti-Bacterial, Does not cause mold on concrete.
• Foam density can be adjusted as 40-60 gr/lt.
• Gypsum Concrete density can be adjusted 140 kg/m3 – 800 kg/m3.
• It provides a good insulation thanks to micro pores in Gypsum Concrete.
• If the concrete mixing time is prolonged, there can be no volume loss.
• Minimum loss during transfer with the pump.
• It does not create stress on the employee due to its natural scent.